Fighting for Dream

/usr/openv/netbackup/bin/admincmd/nbftsrv_config -nbhba
 
Example:
 
/usr/openv/netbackup/bin/admincmd/nbftsrv_config -nbhba
Installing nbhba driver. Are you sure you want to unload QLogic driver: qla2300? [y,n] (y)
/usr/sbin/update_drv-v-d-i "pci1077,2312.1077.12a" qlc
Done copying driver into system directories. Done adding driver.
MUST REBOOT TO COMPLETE INSTALLATION.

/usr/openv/netbackup/bin/admincmd/nbhba -l
 
Example:
 
/usr/openv/netbackup/bin/admincmd/nbhba -l
1 2312 21:00:00:E0:8B:83:9D:A1 "QLA2342" 0 0 101
2 2312 21:01:00:E0:8B:A3:9D:A1 "QLA2342" 1 0 101

 
/usr/openv/netbackup/bin/admincmd/nbhba -modify -wwn wwn_string -mode target
 
Example:
 
/usr/openv/netbackup/bin/admincmd/nbhba -modify -wwn 21:00:00:E0:8B:83:9D:A1 -mode target
 
/usr/openv/netbackup/bin/admincmd/nbhba -modify -wwn 21:01:00:E0:8B:A3:9D:A1 -mode target

/usr/openv/netbackup/bin/admincmd/nbftsrv_config
Installing the Jungo driver and Fibre Transport Server. The following automatic startup and shutdown scripts (respectively) have been installed. They will cause the NetBackup Fibre Transport Server daemon to be automatically shutdown and restarted each time the system boots.
/etc/rc.d/rc2.d/S21nbftserver
/etc/rc.d/rc3.d/S21nbftserver
/etc/rc.d/rc5.d/S21nbftserver
/etc/rc.d/rc0.d/K03nbftserver
/etc/rc.d/rc1.d/K03nbftserver
/etc/rc.d/rc6.d/K03nbftserver
It may be necessary to temporarily unload your QLogic drivers to free up the ports for the nbhba drivers. This is an optional step. If you choose not to do this, you may not have access to all of the HBA ports until a subsequent reboot. Would you like to uninstall and reinstall your native QLogic drivers now? [y,n] (y) y
 
The Qlogic drivers must be unloaded temporarily so that the stub driver (ql2300_stub) can bind to the marked HBA ports during this session. To unload the QLogic driver, answer y.
 
Are you sure you want to unload QLogic driver: qla2300? [y,n] (y) y
Removing qla2300.
Adding qla2300.
Adding qla2xxx.
 
To start the QLogic SANsurfer agent, answer y.
 
Would you like to start the SANsurfer agent (qlremote)? [y,n] (y) y
Starting qlremote agent service Started SANsurfer agent.
/etc/udev/permissions.d/50-udev.permissions updated with Jungo WinDriver permissions.
NetBackup Fibre Transport Server started.
 
To ensure that the FT server always starts after a computer reboot, answer y.
 
Would you like to make these changes persist after a reboot? [y,n] (y) y
Running mkinitrd.
Previous initrd image is saved at /boot/initrd-3.0.9-11.ELsmp.img.12-21-09.12:37:03.

Linux/UNIX:
 
/usr/openv/netbackup/bin/bpclntcmd -sanclient 1
 
Windows:
 
install_path\NetBackup\bin\bpclntcmd.exe -sanclient 1