PXELINUX

What is PXELINUX? PXELINUX is a SYSLINUX derivative, for booting Linux off a network server, using a network ROM conforming to the Intel PXE (Pre-Execution Environment) specification. PXELINUX is not a program that is intended to be flashed or burned into a PROM on the network card; if you want that, check out Etherboot ( http://www.etherboot.org/). If you want to create PXE-compliant boot PROM for your network card (to use with PXELINUX, for example), check out NetBoot (http://netboot.sourceforge.net/). ...

2010-01-25 · 15 min · 3174 words · kevin

Setting up a PXE-Boot Server

This documents how to setup a PXE boot server for Linux. This assumes that you’re using Redhat/FC as the PXE boot server. The vast majority of the information has been obtained from the following webpages: http://dev.brantleyonline.com/wiki/index.php/General_Network_%28PXE%29_Booting http://dev.brantleyonline.com/wiki/index.php/PXE_Booting_-_Fedora_Core The first thing to note is that you need to setup your own mini-network that is completely disconnected from the network, since part of this process requires setting up a DHCP server which could conflict with the corporate DHCP server if they were both running on the same network simultaneously. So get yourself a switch from IT up front. You do *NOT* need the switch immediately, so just put it aside until I mention it again later on. The next step is to choose a box to be the PXE boot server. This can really be any box at all, as long as you have a NIC in it that works reliably under Linux. For the purposes of this documentation, I’m going to assume that you’ve loaded Fedora Core 4 on this box (do that now, if you’ve not already). Get this box onto the network with DHCP (just like a normal installation). 2) Next you’ll need to install the following packages (which ship with FC4 already, so if you did an ’everything’ OS install, you should have them already. If not, you can install them easily with yum): tftp-server dhcp httpd syslinux ...

2010-01-25 · 6 min · 1090 words · kevin

100个句子等于7000个单词

1. Typical of the grassland dwellers of the continent is the American antelope, or pronghorn. 1.美洲羚羊,或称叉角羚,是该大陆典型的草原动物。 2. Of the millions who saw Haley’s comet in 1986, how many people will live long enough to see it return in the twenty-first century. 2. 1986年看见哈雷慧星的千百万人当中,有多少人能够长寿到足以目睹它在二十一世纪的回归呢? 3. Anthropologists have discovered that fear, happiness, sadness, and surprise are universally reflected in facial expressions. 3.人类学家们已经发现,恐惧,快乐,悲伤和惊奇都会行之于色,这在全人类是共通的。 4. Because of its irritating effect on humans, the use of phenol as a general antiseptic has been largely discontinued. ...

2010-01-20 · 13 min · 2645 words · kevin

研华ARK-1310入门工控机

研华ARK-1310 支持2个USB 2.0接口、2个LAN端口、4个COM端口和研华EVA-X4150处理器,都由一个小巧、坚固的机箱保护。4个COM端口都支持RS232/422/485自动流控功能。紧凑型ARK-1310嵌入式机箱配有一个高达8 GB的固态板载CF卡,可轻松地通过50和5 Grms的冲击和振动测试。ARK-1310支持9 VDC ~ 24 VDC的宽范围电压输入。 研华ARK-1310 可作为独立平台应用控制工程网版权所有,也可通过壁挂式、DIN导轨或VESA悬臂等安装方式嵌入式在大型系统中应用。ARK-1310的坚固铝制机箱外壳不仅能够为系统提供EMI、冲击/振动、热/冷保护www.cechina.cn,还能够为安静的无风扇运行提供被动冷却方案。较低的功耗使ARK-1310成为一款冷却运行的嵌入式工控机。 小巧紧凑 和研华ARK-1300系列的其它产品一样,ARK-1310 的尺寸仅为189 mm x 130.6 mm x 41 mm (7.44" x 5.14" x 1.61"),能够满足1U高度要求。因此www.cechina.cn,该款机箱非常适合于各种空间有限应用CONTROL ENGINEERING China版权所有,如自助服务终端和I\O控制系统。 丰富IO接口 ARK-1310提供了4个带自动流控功能的RS-232/422/485端口、2个USB接口、2个LAN端口和8位可编程数字量IO。此外,宽范围的电压输入使之非常适合于各种嵌入式控制应用。 经济高效 ARK-1310 采用单主板架构和低功耗的研华嵌入式EVA-X4150 SOC。较低的购置成本、电源要求、运行成本和较长的服务期限使得该款产品成为一款经济高效的高性能工业机箱。 ARK-1310 适用于各种坚固耐用的无风扇工作系统,如自助服务终端、网关控制器、产品线自动化、IO控制系统、数据采集和传输以及一般的自动化控制器等应用。 注:ARK-1310 可选用Windows CE 5.0、Linux或DOSwww.cechina.cn,不带硬盘驱动器;不适用于XP或XPe。 ARK-1310 为系统集成商提供了功能丰富、即开即用的应用,从而可以有效缩短开发时间。更多ARK-1310的相关信息,请联系研华公司当地销售代表或访问研华网站:http://www.advantech.com.cn/products/ARK-1310/mod_1-3DK668.aspx

2009-11-17 · 1 min · 42 words · kevin

RouerOS DDNS 设置方法

先到www.changeip.com填写注册申请,并添加一个域名。 并在RouterOS的调度程序中添加下列代码: :log info “DDNS: Begin” :global ddns-user “你的用户名” :global ddns-pass “你的密码” :global ddns-host “*1” :global ddns-interface “外网拨号线路,比如(pppoe-out3)” :global ddns-ip [ /ip address get [/ip address find interface=$ddns-interface] address ] :if ([ :typeof $ddns-lastip ] = nil ) do={ :global ddns-lastip 0.0.0.0/0 } :if ([ :typeof $ddns-ip ] = nil ) do={ :log info (“DDNS: No ip address present . " . $ddns-interface . “, please check.”) } else={ :if ($ddns-ip != $ddns-lastip) do={ :log info “DDNS: Sending Update!” :log info [ /tool dns-update name=$ddns-host address=[:pick $ddns-ip 0 [:find $ddns-ip “/”] ] key-name=$ddns-user key=$ddns-pass ] :global ddns-lastip $ddns-ip } else={ :log info “DDNS: No change” } } :log info “DDNS: End”

2009-11-12 · 1 min · 111 words · kevin

磁盘阵列技术-术语汇编

STP:IEEE Std 802.1D-1998定义,不能快速迁移。即使 是在点对点链路或边缘端口,也必须等待2倍的forward delay 的时间延迟,网络才能收敛。 RSTP:IEEE Std 802.1w定义,可以快速收敛,却存在以 下缺陷: 局域网内所有网桥共享一棵生成树,不能按vlan 阻塞冗余链路。 MSTP可以弥补这样缺陷,它允许不同vlan的流量 沿各自的路径分发,从而为冗余链路提供了更好的 负载分担机制。 MSTP: Multiple Spanning Tree Protocol 多生成树协议 在规范IEEE Std 802.1s中第13节描述。 MSTP算法通过应用MSTP、STP或RSTP的桥任意互连的桥接网络,为分配给任一个特定VLAN的帧提供了简单而完备的连通性。 MSTP允许不同VLAN的数据从各自的路径分发。各条路径建立在由LAN和MST桥组成的MST域中的各个独立的多生成树实例的基础上。

2009-11-04 · 1 min · 26 words · kevin

千兆网线线序

千兆5类或超5类双绞线的形式与百兆网线的形式相同,也分为直通和交叉两种。直通网线与我们平时所使用的没有什么差别,都是一一对应的。但是传统的百兆网络只用到4 根线缆来传输,而千兆网络要用到8 根来传输,所以千兆交叉网线的制作与百兆不同,制作方法如下:1对3,2对6,3对1,4对7,5对8,6对2,7对4,8对5 例如: 一端为:半橙、橙,半绿、兰,半兰、绿,半棕、棕; 另一端:半绿、绿,半橙、半棕、棕,橙,兰,半兰

2009-10-28 · 1 min · 6 words · kevin

中国每年出生人口数 1976年 – 2000年 历年男女性别比

年份 比例 总数 男 女 1976年出生 50.92% 20,491,797 10,435,196 10,056,601 1977年出生 50.86% 17,931,155 9,119,685 8,811,470 1978年出生 50.55% 18,831,591 9,519,345 9,312,246 1979年出生 50.45% 18,924,822 9,548,059 9,376,763 1980年出生 50.64% 18,393,809 9,315,481 9,078,328 1981年出生 51.00% 19,122,938 9,752,137 9,370,801 1982年出生 51.02% 23,100,427 11,786,950 11,316,732 1983年出生 51.21% 20,065,048 10,275,677 9,789,371 1984年出生 51.53% 20,313,426 10,468,201 9,845,225 1985年出生 51.88% 20,429,326 10,598,460 9,830,866 1986年出生 51.85% 23,190,076 12,023,710 11,166,366 1987年出生 53.87% 25,282,644 13,619,530 12,663,114 1988年出生 52.00% 24,576,191 12,779,621 11,796,570 1989年出生 52.16% 25,137,678 13,110,848 12,026,830 1990年出生 52.69% 26,210,044 13,811,030 12,399,014 1991年出生 53.16% 20,082,026 10,674,963 9,407,063 1992年出生 53.40% 18,752,106 10,014,222 8,737,884 1993年出生 53.53% 17,914,756 9,590,414 8,324,342 1994年出生 53.83% 16,470,140 8,866,012 7,604,128 1995年出生 54.08% 16,933,559 9,157,597 7,775,962 1996年出生 54.24% 15,224,282 8,257,145 6,967,137 1997年出生 54.64% 14,454,335 7,897,234 6,557,101 1998年出生 54.97% 14,010,711 7,701,684 6,309,027 1999年出生 55.09% 11,495,247 6,332,425 5,162,822 2000年出生 54.08% 13,793,799 7,460,206 6,333,593

2009-09-22 · 1 min · 130 words · kevin

鼠标电路板上G, V ,C ,D

G — GND 电源地线 ,一般是黑色的 V — VCC 电源正极 ,一般是红色的 。电源正极和地线之间一般接有一个滤波电容,根据滤波电容的极性可以判断接对了没有。 C — CLOCK 时钟 , 白色 D — DATA 数据,绿色或蓝色。C\D 如果接上了不管用可以颠倒过来试试。

2009-09-02 · 1 min · 22 words · kevin

RouterOS之备份和恢复设置

1.备份和恢复设置 你想想辛辛苦苦设置好的防火墙规则,网卡设置,各个路由,端口映射万一弄错了或重新安装时,是不是都要重新自已设置?这个巨麻烦!!!但rouetos却为你考虑得很周到,可以手工备份你的设置文件,需要时只要一个命令即可恢复! 大家可以用winbox登陆,注意用admin帐号,在左边是不是有个files?点开,再点对话框上面的backup,这样就把当前的设置保存一个文件里面了,再用ie登陆你的路由,用网管帐号:密码@路由ip:端口,登陆到你的路由后就会到你保存的文件了!用ie直接下载吧!/" target=_blank>ftp://网管帐号:密码@路由ip:端口,登陆到你的路由后就会到你保存的文件了!用ie直接下载吧! 当你重新安装时,只要把内网弄通,用ie再登陆你的路由,把这个设置文件传上去,在winbox左边下面有个te开头的英文,这是终端模拟,点开后就像在路由上操作一样,用以下命令恢复你以前的设置: system回车 backup回车 load name=你保存的设置文件名 回车 提示重启就一下子恢复到你以前设置了!! 是不是方便实用啊? 大家可能会说用winbox备份不爽,那我们也可以用终端备份呀! 在winbox左边下面有个te开头的英文,这是终端模拟,点开后就像在路由上操作一样,用以下命令备份你以前的设置: system回车 backup回车 save name=你保存的设置文件名 回车 建议文件名用日期表示可以很直观。这样就按你的文件名保存了。 用load name命令就是恢复了. 2.恢复路由本身默认值。 如果设错了规则或者地址,造成win不能进入管理界面,可以这样复原: 使用 admin 登陆 system 回车 reset 选择 y 将删除所有改动,恢复新装的状态 这个是恢复到出厂设置,很适合刚开始设置routeos时用用! =============== 2.导入导出配置命令: 使用export命令导出,使用import命令导入。 如: 导出全部配置命令为:/export file=xxx 导入配置命令:/import file=xxx 导出防火墙配置的命令:/ip firewall export file=xxx

2009-08-25 · 1 min · 46 words · kevin