Ubuntu设置VirtualBox 桥接方式网络

1、先安装含有建立虚拟网络设备 ( TAP interfaces ) 的工具 uml-utilities 和桥接工具 bridge-utils: sudo apt-get install uml-utilities sudo apt-get install bridge-utils 为了使你的虚拟机能够访问网络接口,你必须将运行虚拟主机的用户的用户名(通常是你的ubuntu登录用户名)添加到uml-net用户组(请用你的用户名替换其中的“vboxuser”): sudo gpasswd -a vboxuser uml-net 注意:为了使改动生效,请重新启动电脑。 2、向你的 ubuntu 操作系统描述你要添加的虚拟网络设备,编辑 /etc/network/interfaces: sudo gedit /etc/network/interfaces 在打开的文件后面添加下面的内容,将虚拟网络接口命名为 “tap0”,指定该接口IP配置方法为手动,并指定使用该接口的用户(请用你的用户名替换其中的 “vboxuser”): auto tap0 iface tap0 inet manual up ifconfig $IFACE 0.0.0.0 up down ifconfig $IFACE down tunctl_user vboxuser auto br0 iface br0 inet dhcp bridge_ports all tap0 或: auto br0 iface br0 inet static address 192.168.1.57 netmask 255.255.255.0 gateway 192.168.1.1 bridge_ports all tap0 3、首次使用需要激活刚才建立的虚拟网络接口和网络桥: sudo /sbin/ifup tap0 sudo /sbin/ifup br0 这个步骤只需要做一次,下次主机重新启动时,这个接口和桥将自动激活。 4、让 virtualbox 使用这个虚拟网络接口,启动 virtualbox,在主界面上选中要使用刚才建立的虚拟网络接口tap0的虚拟机,点“设置”,在弹出的窗口中选“网络”,选中其中一块网卡(通常为 “网络适配器 0”),选中“启用网络适配器”,“连接到”后面选 “Host Interface”,选中“接入网线”,然后在“主机网络界面名称”中填入刚才建立的虚拟网络接口的名字 “tap0”,确定。 5、最后,配置主机和虚拟机的网络,使主机和虚拟机在同一个网段,这样主机和虚拟机就成了局域网中地位相同的两台机器了,可以互相访问了。

2009-11-06 · 1 min · 94 words · kevin

linux下制作和使用ISO文件

Linux下制作iso的方法: 直接从光盘做成iso可以用下面命令: dd if=/dev/cdrom of=/cd.iso cat /dev/cdrom >;/cd.iso cp -r /dev/cdrom cd.iso 还可以使用复杂一些的 genisoimage 命令,可以提供强大的制作ISO的功能,如将本地文件夹做成ISO等。 在Linux下使用ISO就更方便了,直接mount就可以了: mount -t iso9660 -o loop cd.iso /path

2009-11-06 · 1 min · 23 words · kevin

修复ubuntu的grub

当windows的启动引导程序或者其他程序替换了linux的grub时,可以用下面方法修复: 1、用一张linux的livecd启动系统,打开终端。 2、进入grub的命令行:$ sudo grub 3、修改启动表:hd0表示第一块硬盘,6是包含"/boot/grub/“的分区号,可以挨个试。 > root (hd0,6) > setup (hd0) > quit 4、重启。

2009-11-06 · 1 min · 15 words · kevin

linux下用批量改名命令的写法

问题描述:在一个目录下,有一堆文件,例如 afile.txt bpage.htm csome.jpg …. 想批量进行改名,都统一改为: name1.file name2.file name3.file … 解决办法: $ ls | grep -n ’’ | sed ’s/\([0-9]*\):\(.*\)/\2 name\1.file/g’ | xargs -n 2 mv 用 ls | grep -n ’’ 可以对文件加上行号,输出结果为: 1:afile.txt 2:bpage.htm … 然后通过 sed 进行模式匹配、替换操作, 最后通过 xargs 构造出 mv 的参数。

2009-11-06 · 1 min · 44 words · kevin

ubuntu 配置 vnc server

通过将服务器配置成VNC SERVER,可以让其他主机使用图形方式登录这台服务器。 在ubuntu下配置vnc server很简单,方法如下: 服务器端: 1、先安装VNC服务程序: $ sudo apt-get install vnc4-common vnc4server 2、给当前用户设置vnc登录密码: $ vncpasswd 3、修改vnc的默认设置,使启动时运行gnome作为X的桌面(如果不设置,vnc将使用twm,你可以试试,相信你会很不习惯的): $ vncserver :1 $ vncserver -kill :1 注意:里面的":1"代表display号,客户登录的时候得写相同的display号才能登录(见后面客户端部分)。 修改~/.vnc/xstartup文件:(红字是修改和增加的东西) #!/bin/sh # Uncomment the following two lines for normal desktop: # unset SESSION_MANAGER # exec /etc/X11/xinit/xinitrc [ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup [ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources xsetroot -solid grey vncconfig -iconic & xterm -geometry 80x24+10+10 -ls -title “$VNCDESKTOP Desktop” & # twm & gnome-session & 上面修改的意思是将默认启动的twm程序改为gnome,如果想用KDE作为桌面的,可以改为:startkde & 然后再次启动VNC SERVER: $ vncserver :1 客户端: 1、安装VNC客户程序: $ sudo apt-get install vnc4-common xvnc4viewer 2、然后你就通过Terminal Server Client登录了:Applications -> Internet -> Terminal Server Client;Computer为:服务器IP:display#,例如:12.34.56.78:1;protocol选择:VNC。

2009-11-06 · 1 min · 98 words · kevin

国产Linux发行版 CDLinux

CDlinux 是一种小型的迷你 GNU/Linux 发行版,其名称取自英文的 “Compact Distro Linux“。CDlinux 的体形小巧,功能却挺强大。 CDlinux 包含了最新的 Linux 内核,Xorg 图形界面,XFce 窗口管理器,和许多其它流行软件,如 Firefox 浏览器,Pidgin 即时通讯程序等等。并且 CDlinux 发行版中还包含了各种重要的、常用的库文件,用户可以很方便地按自己的需要扩展 CDlinux。 CDlinux 能很好地支持国际化(i18n)和各种语言、locale,目前对简体中文(zh_CN)、传统中文(zh_TW)和英文(en_US)提供全面支持。用户也可以很方便地定制 CDlinux 以支持他们自己的语言、locale。 CDlinux 能自动检测出自己被安装在什么设备上。你可以把 CDlinux 安装到 CD、DoC、Flash、HD 或者 MD 等类型的驱动器上,这些驱动器可以连接在 ATA、SATA、SCSI、USB 或者 IEEE1394 等总线上。在绝大多数情况下,CDlinux 都能自动识别这些设备并找到自己。 CDlinux 支持多种文件系统,你可以把它安装到 ext2、ext3、jfs、reiserfs、xfs、isofs、udf 及 hfs、hfsplus、fat、ntfs 等等分区上,CDlinux 都能自动挂载它们、找到自己并正常启动。 CDlinux 是高度灵活、可定制的。你可以拿它作为一个功能强大的系统修复、维护工具;你也可以加上自己需要的软件把它扩展成一个功能全面的桌面操作系统;还可以去掉 自己不需要的功能,把 CDlinux 裁减成一个嵌入式系统。完全可以按需定制你自己的 CDlinux。

2009-11-05 · 1 min · 50 words · kevin

磁盘阵列技术-术语汇编

STP:IEEE Std 802.1D-1998定义,不能快速迁移。即使 是在点对点链路或边缘端口,也必须等待2倍的forward delay 的时间延迟,网络才能收敛。 RSTP:IEEE Std 802.1w定义,可以快速收敛,却存在以 下缺陷: 局域网内所有网桥共享一棵生成树,不能按vlan 阻塞冗余链路。 MSTP可以弥补这样缺陷,它允许不同vlan的流量 沿各自的路径分发,从而为冗余链路提供了更好的 负载分担机制。 MSTP: Multiple Spanning Tree Protocol 多生成树协议 在规范IEEE Std 802.1s中第13节描述。 MSTP算法通过应用MSTP、STP或RSTP的桥任意互连的桥接网络,为分配给任一个特定VLAN的帧提供了简单而完备的连通性。 MSTP允许不同VLAN的数据从各自的路径分发。各条路径建立在由LAN和MST桥组成的MST域中的各个独立的多生成树实例的基础上。

2009-11-04 · 1 min · 26 words · kevin

svn库中添加、删除、提交文件的脚本

#!/bin/bash COUNT=`svn status | grep ‘^?’ |wc -l` until [ $COUNT -lt “1” ] do CURRENT=`svn status | grep ‘^?’ |awk {‘print $2’} | head -$COUNT | tail -1` echo “Do you want to add $CURRENT? (y/n): " read ANS if [ $ANS = “y” ] then svn add $CURRENT echo “$CURRENT added to repository” COUNT=`expr $COUNT - 1 ` elif [ $ANS = “n” ] then COUNT=`expr $COUNT - 1 ` fi done ...

2009-11-04 · 1 min · 159 words · kevin

How To Create A Cluster Testbed Using CentOS 5 Vir

A. Overview This guide attempts to provide a Xen based test environment where you can practice setting up a two node cluster (cluster setup itself is not discussed here - I’m merely giving you what you need to set it up). XEN can host two type of guest systems para-virtualized and fully-virtualized: for para-virtualized guests you require the Red Hat Enterprise Linux 5 installation tree available over NFS, FTP or HTTP. for fully-virtualized guest installations you will require DVD or CD-ROM distribution media or a bootable .iso file and a network accessible installation tree For details, please refer to the RHEL5 Virtualization Manual. I’ll be using para-virtualized guests here in my setup. There will be three systems involved here: node00 - physical system virtual IPs: 192.168.222.1 (public1 vlan) 192.168.100.1 (private1 vlan) node01 - para-virtualized guest 1 virtual IPs: 192.168.222.10 (public1 vlan) 192.168.100.10 (private1 vlan) node02 - para-virtualized guest 1 virtual IPs: 192.168.222.20 (public1 vlan) 192.168.100.20 (private1 vlan) B. What I used an HP Blade bl25p machine with 4G of RAM (this is actually an AMD64 blade machine). A machine with decent amount of RAM and processing speed should do. Centos i386 5 update 1 www.centos.org DVD ISO downloaded HTTP, NFS and FTP installation sources were created from this iso. Also, the yum repository that can be used by host and guest systems will be generated from the centos iso image. logical volumes hosting the guests and the “virtual luns” via iscsi (you can also use disk partitions - please refer to the virtualization guide for details). 1. My LVM setup The following is my LVM configuration. The lvLUN0* entries are the ones I used for iSCSI setup and will be shared by the two virtual guest systems. lvs LV VG Attr LSize origin Snap% Move Log Copy% lvLUN01 Virtual00VG -wi-ao 50.00G lvLUN02 Virtual00VG -wi-ao 50.00G lvNODE01 Virtual00VG -wi-ao 30.00G lvNODE02 Virtual00VG -wi-ao 30.00G lvNODE03 Virtual00VG -wi-ao 15.00G lvsys00 vg00 -wi-ao 512.00M lvsys01 vg00 -wi-ao 8.00G lvsys02 vg00 -wi-ao 8.00G lvsys03 vg00 -wi-ao 512.00M lvsys04 vg00 -wi-ao 128.00M lvsys05 vg00 -wi-ao 1.00G lvsys06 vg00 -wi-ao 256.00M C. Host Preparation I’m assuming that you know how to install CentOS or other RHEL based distributions and that you are familiar with rpm installation. Since I do a lot of setup for test/dev environments at work, I already have an installation server making it easy to do a network based install via PXE. The kickstart file for node00 is provided below. You can do a local media install (you have the ISO so you can burn it to a DVD) and just refer to the kickstart file for some of the configuration. The list of packages I used is in the %packages section of node00’s kickstart file. You can install them manually using yum, like: # will list centos installation groups yum grouplist # will install Virtualization group yum groupinstall Virtualization 1. ks file and installation 1.a kickstart file I use for the host (node00) You’ll have to modify the following to suit your setup. ## START node00_ks.cfg #modify for your own settings install nfs –server=remote_server –dir=/path/to/CENTOS5U1/i386 lang en_US.UTF-8 keyboard us skipx reboot network –device eth2 –bootproto static –ip a.b.c.1 –netmask 255.255.255.0 –gateway a.b.c.2 –nameserver x.y.z.n –hostname node00.example.com # grub and root password is a1s2d3f4g5 rootpw –iscrypted $1$3CXK2$CG9WlX2PuPpp7nxYMQGwP0 firewall –disabled authconfig –enableshadow selinux –disabled timezone Asia/Singapore bootloader –location=mbr –driveorder=cciss/c0d0 –append=“rhgb quiet” –md5pass=$1$3CXK2$CG9WlX2PuPpp7nxYMQGwP0 clearpart –all –initlabel –drives=cciss/c0d0 part /boot –fstype ext3 –size=100 –ondisk=cciss/c0d0 part pv.100000 –size=100 –grow –ondisk=cciss/c0d0 –asprimary volgroup vg00 –pesize=32768 pv.100000 logvol /tmp –fstype ext3 –name=lvsys05 –vgname=vg00 –size=1024 logvol /opt –fstype ext3 –name=lvsys04 –vgname=vg00 –size=128 logvol /var –fstype ext3 –name=lvsys03 –vgname=vg00 –size=512 logvol /usr –fstype ext3 –name=lvsys02 –vgname=vg00 –size=8192 logvol swap –fstype swap –name=lvsys01 –vgname=vg00 –size=8192 logvol /home –fstype ext3 –name=lvsys06 –vgname=vg00 –size=256 logvol / –fstype ext3 –name=lvsys00 –vgname=vg00 –size=512 %packages @development-libs @editors @system-tools @text-internet @x-software-development @virtualization @dns-server @core @base @ftp-server @network-server @legacy-software-development @base-x @web-server @printing @server-cfg @sql-server @admin-tools @development-tools lsscsi createrepo audit net-snmp-utils iptraf tftp lynx mesa-libGLU-devel kexec-tools bridge-utils device-mapper-multipath vnc-server xorg-x11-server-Xnest xorg-x11-server-Xvfb imake openmotif -vim-enhanced -zisofs-tools -zsh -bluez-hcidump -sysreport ## END of node00_ks.cfg 2. Host configuration Setting up an HTTP, NFS and FTP installation server: 2.a web server #/etc/httpd/conf.d/centos5u1.conf Alias /centos5u1 /var/ftp/pub/centos5u1 Options Indexes FollowSymLinks MultiViews IndexOptions FancyIndexing Order deny,allow Deny from all Allow from 127.0.0.1 ::1 all Then start the httpd service and make sure it does during startup: service httpd start chkconfig httpd on 2.b NFS server Edit /etc/exports and put the following into it: # /etc/exports /var/ftp/pub/centos5u1 192.168*(ro) service nfs start chkconfig nfs on 2.c FTP server Since we already have the source in /var/ftp/pub/centos5u1, all that is needed is to start vsftpd: service vsftpd start chkconfig vsftpd on 2.d YUM repository For this setup, I only use a local yum repository from the Centos DVD ISO I downloaded. First, I loopback mount it in /var/ftp/pub/centos5u1/i386/: cd /var/ftp/pub/centos5u1/ mkdir temp mount -o loop CentOS-5.1-i386-bin-DVD.iso temp cp -pr temp i386 umount temp createrepo -g i386 (i386/repodata/ will then be updated.) For RHEL5, it’s different: createrepo -g repodata/comps-rhel5-server-core.xml Server You need to do this inside the i386 directory (after loopback mounting and copying the whole directory structure). 2.d.1 the yum repo configuration: I renamed the default repo files in /etc/yum.repos.d/ to *-repo (instead of *.repo) to disable them. I then created this file: #/etc/yum.repos.d/CentOS5.repo [centos5-Server] name=CentOS5 Server baseurl=http://node00/centos5u1/i386 enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5 node00 needs to be defined in /etc/hosts for the above file to work. or just replace node00 with its IP address. 2.e VNC server You won’t be needing a vnc connection if you have local console access to the physical machine. All you need to do is switch into gui mode: telinit 5 and open a gui terminal (like gnome-terminal or kde konsole). But since I do everything remotely, I use vncserver and vncviewer to do gui based stuff. 2.e.1 run vncserver: This will bringvup a vncserver in node00 that is accessible via “vncviewer” at node00:1 (assuming node00 is resolveable from your vncviewer host). vncserver You will require a password to access your desktops. Password: Verify: xauth: creating new authority file /root/.Xauthority New ’node00.example.com:1 (root)’ desktop is node00.example.com:1 Creating default startup script /root/.vnc/xstartup Starting applications specified in /root/.vnc/xstartup Log file is /root/.vnc/node00.example.com:1.log How To Create A Cluster Testbed Using CentOS 5 Virtualization And iSCSI - Page 2 How To Create A Cluster Testbed Using CentOS 5 Virtualization And iSCSI - Page 3 next How To Create A Cluster Testbed Using CentOS 5 Virtualization And iSCSI - Page 2 Copyright ? 2008 roderick tapang

2009-11-03 · 6 min · 1074 words · kevin

Memcached的管理

在以前写过了"搭建nginx + python + django +memcached+ mysql +fastcgi 环境"一文,有不少朋友问我关于memcached的管理的问题,比如查看memcached的运行情况等等,我们知道目前memcached没有直观的工具来查看整个运行情况,不过我们可以通过系统级--shell命令。 1、数据存储(假设key为dbasky.net,value为88888) printf “set dbasky.net 0 0 5\r\n88888\r\n” | nc 127.0.0.1 11211 STORED 2、数据取回(假设key为dbasky.net) printf “get dbasky.net\r\n” | nc 127.0.0.1 11211 VALUE dbasky.net 0 5 88888 END 3、数值增加1(假设key为dbasky.net,并且value为正整数) printf “incr dbasky.net 1\r\n” | nc 127.0.0.1 11211 88889 4、数值减少3(假设key为dbasky.net,并且value为正整数) printf “decr dbasky.net 3\r\n” | nc 127.0.0.1 11211 88886 5、数据删除(假设key为dbasky.net) printf “delete dbasky.net\r\n” | nc 127.0.0.1 11211 DeleteD 6、查看Memcached状态 [root@app3 ~]# printf “stats\r\n” | nc 127.0.0.1 11211 STAT pid 20272 STAT uptime 927901 STAT time 1256541017 STAT version 1.2.8 STAT pointer_size 64 STAT rusage_user 72323.142211 STAT rusage_system 270758.303481 STAT curr_items 2255461 STAT total_items 2237096141 STAT bytes 3865876133 STAT curr_connections 156 STAT total_connections 2662892830 STAT connection_structures 2975 STAT cmd_flush 0 STAT cmd_get 7155551459 STAT cmd_set 2237096141 STAT get_hits 6275571127 STAT get_misses 879980332 STAT evictions 21174550 STAT bytes_read 5936788593022 STAT bytes_written 12278494693042 STAT limit_maxbytes 4294967296 STAT threads 9 STAT accepting_conns 1 STAT listen_disabled_num 0 END 7、模拟top命令,查看Memcached状态: watch “printf ‘stats\r\n’ | nc 127.0.0.1 11211” 或者 watch “echo stats | nc 127.0.0.1 11211” [root@app3 ~]# watch “printf ‘stats\r\n’ | nc 127.0.0.1 11211” Every 2.0s: printf ‘stats\r\n’ | nc 127.0.0.1 11211 Mon Oct 26 16:11:26 2009 STAT pid 20272 STAT uptime 927970 STAT time 1256541086 STAT version 1.2.8 STAT pointer_size 64 STAT rusage_user 72327.750510 STAT rusage_system 270774.932953 STAT curr_items 2255435 STAT total_items 2237240981 STAT bytes 3865771193 STAT curr_connections 269 STAT total_connections 2663066932 STAT connection_structures 2975 STAT cmd_flush 0 STAT cmd_get 7156031867 STAT cmd_set 2237240981 STAT get_hits 6275980308 STAT get_misses 880051559 STAT evictions 21177694 STAT bytes_read 5937174840056 STAT bytes_written 12279303680177 STAT limit_maxbytes 4294967296 STAT threads 9 STAT accepting_conns 1 STAT listen_disabled_num 0 END 下面解释下各项的含意: uptime 是memcached运行的秒数,cmd_get是查询缓存的次数。这两个数据相除一下就能得到平均每秒请求缓存的次数,cmd_set 就是设置key=>value的次数。整个memcached是个大hash,用cmd_get没有找到的内容,就会调用一下cmd_set写进缓存里。紧跟着是get_hits,就是缓存命中的次数。缓存命中率 = get_hits/cmd_get *100%。get_misses的数字加上get_hits应该等于cmd_get。而total_itemscurr_items表示现在在缓存中的键值对个数,在图上total_items == cmd_set == get_misses,不过当可用最大内存用光时,memcached就会删掉一些内容,上面的等式就不成立了。

2009-11-02 · 2 min · 274 words · kevin